Cleaning the Canopy
7.1. The canopy is made of very high quality,
UV-radiation resistant material. The water
repellent surface withstands rain showers
lasting approximately 10 minutes. Please be
sure that the canopy has completely dried
prior to folding! Should the folded canopy
become wet, it is imperative that it be opened
in order to dry!
7.2. The material can be washed with lukewarm
water and mild cleaning agents. Please use a
sponge or soft brush to wipe the material. The
canopy should be completely extended and
the hinges should be locked in Position 2.
(Fig. 10)
7.3. After cleaning, make sure that the canopy has
dried completely before folding.
➔
CAUTION: Folding the canopy when it is wet
or damp can cause permanent stains!
Removing the Canopy
8.1. The canopy contains four rods, which give
the canopy its shape. These rods are bent
and arched under high tension and are held in
position by the hinges.
8.2. Loosen the top row of hexagon bolts with the
enclosed hexagonal wrench until the pins can
be safely pulled from the hinges. (Fig. 11)
Do not loosen the bottom bolts of the hinges!
8.3. Carefully remove the pins. Disassembly
should definitely be done by two people.
8.4. The rods can now be pulled out of their
casings so that the canopy can be cleaned.
8.5. Care Instructions
Please follow the recommended washing
instructions for the Orbit canopy.
The canopy should not be machine washed,
as this could affect the impregnation, thus
making the material more susceptible to dirt.
It is recommended that the canopy be dry
cleaned.
Soiling caused by air pollutants should be
removed with a dry brush at regular intervals.
Small stains and dirt can be removed by hand
washing using a detergent for fine washables
and lukewarm water (approx. 30°C).
Afterwards, rinse the canopy several times
with clear water until all the detergent has
been removed. Then let the canopy air-dry.
Under no circumstances should a high-
pressure machine be used.
Important - always remove stains immediately.
For hardened or even soft dirt, the coarse
particles should be removed before treating
the stain with a blunt knife. Carefully blot the
stain with an absorbent cloth or sponge –
never rub. Work from the edge of the stain
towards the middle, in order not to spread
the stain. Should the stain already be dry,
then gently dab it with it with a damp cloth
or sponge until it disappears. Never remove
a stain using a household cleaner (e.g.,
washing up liquid).
Should you have questions regarding the care
of the Orbit canopy, please contact us at
+49-4131-22 447-0.
8.6 Repeat steps 8.1. to 8.4. on the opposite
hinge.
➔
NOTE: For safety and ease of operation,
attaching or removing the canopy requires
two people!
Attaching the Canopy
9.1. Please follow steps 8.1. to 8.4. in reverse
order. (Fig. 13)
9.2. Make sure that all bolts have been secured
tightly before the canopy is opened.
Congratulations. You have purchased a quality
product from DEDON
®
a worldwide leader in the
manufacture of high quality outdoor and indoor
furniture made of original Hularo
®
fibre.
Please read the following instructions carefully
before using the Orbit Sofa. Because the Sofa
is unusually large and contains moving parts,
for safety and ease of operation, the Orbit Sofa
should always be assembled, dismantled or
moved by two people.
Unpacking the Orbit
1.1. Carefully remove the protective cover by hand.
Do not use knives or other sharp objects that
could damage the basketwork or upholstery.
Operation of the ‘ORBIT’ Canopy
2.1. Unfold the canopy by pulling the front canopy
section into the first position. (Fig. 1)
2.2. The swivel levers located in the left and right
hinges can now be locked securely in
Position 1; or locked in Position 2 to fully
extend the canopy.
2.3. Make sure the swivel levers are securely
locked into position! (Fig. 2)
Folding the Orbit Canopy
3.1. Pull the front canopy section forward with
one hand.
3.2. Now, lightly press the swivel lever in the hinge
in order to release it from Position 2. (Fig. 3)
3.3. Lower the canopy until the swivel lever locks
into Position 1.
3.4. Repeat steps 3.1 to 3.3. on the opposite
hinge.
3.5. Return to the first hinge and repeat the steps
in order to fully fold the canopy. (Fig.4)
➔
CAUTION: Keep fingers clear of the hinges
when folding the canopy!
Moving the Orbit Sofa
4.1. The Orbit Sofa is equipped with foldaway
casters located under the rear side of the Sofa.
4.2. In order to move the Sofa using this
mechanism, lift the back of the unit and pull
the casters forward until they are fully
extended. (Fig. 5)
➔
CAUTION: Keep fingers clear of the casters
when lowering the Sofa!
4.3. Now, the Orbit Sofa can be moved by lifting
the front side of the unit and pulling or
pushing it into the desired position. (Fig. 6)
4.4. In order to unlock the casters, lift the back of
the unit and push the casters back completely.
➔
CAUTION: Never sit on the Sofa with
extended casters!
Rotating the Orbit Sofa
5.1. Roll casters are located under the unit, which
enable easy rotation of the unit. (Fig. 7)
5.2. Sofa should only be rotated on smooth,
level surfaces. (Fig. 7)
5.3. Stones, sand or grass could obstruct and
damage the casters. (Fig. 7)
Positioning the Orbit Sofa
6.1. When using the Orbit Sofa on uneven or
sandy surfaces, it is advisable to mount the
solid plastic gliders instead of the casters.
6.2. In order to replace the casters with gliders,
turn the sofa upside down and remove the
casters by unscrewing the mounting. (Fig. 8)
6.3. Replace the casters with the gliders. Make
sure that the glider mounting plates are
screwed securely to the underside of the unit.
(Fig. 9)
1
2
3
4
5
6
7
8
9
English