248-624-7710 / dedoes.com
Alliance A7 Assembly Instruc�ons
P1615 RV.5 2022-05-20
To install the header and top shelf cover that was packaged with the base unit:
Step 1 – Remove one screw closest to the front of the system from each side of the highest unit.
Step 2 - Install the top shelf cover on top of the highest mixing unit to enclose the drive system.
The top shelf cover is only included with machines that are all mixing.
If the configura�on includes non-mixing storage shelves the top shelf cover will not be included.
Step 3 - Insert header on the top of the system. Make sure the header is inserted inside the front rail.
Step 4 - Secure the header to the system by replacing the front screws and �ghtening them.
Back of Machine
Step 2
Step 4
To install the �mer that was packaged with the base unit:
Step 1 – Select the desired height of the �mer loca�on and remove the screw closest to the front right on right side of the system.
Step 2 - Install the �mer with �mer bracket using the screw to the side panel.
Timers and brackets may vary from images shown in this manual.
Step 3 - Tighten the screw to secure the �mer in place.
Step 3