248-624-7710 / dedoes.com
Alliance A7 Assembly Instruc�ons
P1615 RV.5 2022-05-20
Step 3 – Tighten the screws from the front interior of the machine.
Note: The assembled chimney sec�ons may have a small gap; this will not affect the proper func�on of the machine.
Use the supplied Duct Tape to seal each sec�on.
Step 4 - Place the vent covers over the opening on the top of the highest heated unit.
Step 1
Step 2
D. Installa�on of the Chimney Sec�ons and Vent Covers
The Alliance A7 machine uses mul�ple sizes of chimney sec�ons that differ in height. The height of each chimney sec�on matches
the height of the heated unit that the sec�on should be a�ached to.
Step 1 – Insert the four moun�ng screws loosely into the threaded loca�ons. Do not �ghten the screws.
Step 2 – Insert chimney on the keyholes in back panel of the appropriate unit.
Vent Cover
