DeDietrich dpi7688xt, Руководство пользователя

Страница: 22 / 27

21
2.10 SAFETY PRECAUTIONS AND
RECOMMENDATIONS
Residual heat
After intensive use, the cooking area you
have just used will remain hot for several
minutes.
A “H” symbol is displayed during this time.
Avoid touching the areas concerned.
Temperature limiter
Each cooking zone is fitted with a safety
sensor that continuously monitors the
temperature of the bottom of the pan.
In the event that an empty pan is left
on a zone that is switched on, the
sensor automatically adapts the power
delivered by the hob and limits the risk
of damaging the cookware or the hob.
Spillage protection
The hob may be switched off in the
following three cases:
- Spillage covering the control keys.
- Damp cloth placed over the keys.
- Metal object placed on the control
keys.
Remove the object or clean and dry the
keys and resume cooking.
In these cases, the symbol is displayed
accompanied by an audible signal.
"Auto-Stop" system
If you forget to switch off a pan, your
hob has an “Auto-Stop” safety function
that automatically switches off the
forgotten cooking zone after a pre-set
time (between 1 and 10 hours based on
the power level setting).
If the safety system is triggered, the
cooking zone is shown as cut off with
"AS" displayed on the control panel and
a beep sounds for about 2 minutes. To
stop it, simply press any of the control
keys.
Sounds similar to the ticking of a
clock may be heard.
These sounds occur when the hob is in
operation and disappear or decrease
according to the heating configuration.
Low whistling or humming may also
occur depending on the model and on
the quality of your pan. These noises
are a normal part of induction technology
and do not indicate a fault.
We do not recommend using any
hob protection mechanisms.
•
2
USE