DeDietrich BL 150 Скачать руководство пользователя

Страница: 35 / 40

8 Warranty

8.1

General

You have just purchased one of our appliances and we thank you for

the trust you have placed in our products.
Please note that your appliance will provide good service for a longer

period of time if it is regularly checked and maintained.
Your fitter and our customer support network are at your disposal at

all times.

8.2

Warranty terms

France

: The following provisions are not exlcusive of the

buyer being able to benefit from the legal warranty

stipulated in Articles 1641 to 1648 of the Civil Code.

Belgium

: The following provisions regarding the

contractual warranty are not exclusive of the buyer being

able to benefit from the legal provisions applicable in

Belgium regarding hidden defects.

Portugal

: The following provisions do not adversely affect

consumers' rights, as laid down in Decree-Law 67/2003 of

8 April amended by Decree-Law 84/2008 of 21 May,

warranties relating to sales of consumer goods and other

implementing rules.

Other countries

: The following provisions are not

exclusive of the buyer being able benefit from the legal

provisions applicable regarding hidden defects in the

buyer's country.

Starting from the purchase date shown on the original fitter's invoice,

your appliance has a contractual guarantee against any

manufacturing defect.
The length of the guarantee is mentioned in the price catalogue.
The manufacturer is not liable for any improper use of the appliance

or failure to maintain or install the unit correctly (the user shall take

care to ensure that the system is installed by a qualified engineer).

In particular, the manufacturer shall not be held responsible for any

damage, loss or injury caused by installations which do not comply

with the following:

applicable local laws and regulations,

specific requirements relating to the installation, such as national

and/or local regulations,

the manufacturer's instructions, in particular those relating to the

regular maintenance of the unit,

BL 150...500

8. Warranty

01/03/2011 - 300019417-001-C

Содержание BL 150









































Результаты поиска

Содержание BL 150

Отзывы:

Похожие инструкции для BL 150

Бренды по названию

Популярные бренды

DeDietrich BL 150, Инструкция по установке, эксплуатации и обслуживанию

Результаты поиска

Содержание BL 150

Отзывы:

Похожие инструкции для BL 150

Бренды по названию

Популярные бренды