Dedicated Micros SD Excel, Руководство по установке, Страница: 64 / 232

64
SD Excel
Note: Ports on the switches are allocated using a combination of base switch number and configuration
page. Each Layer 3 Enhanced CCTV Switch has a hardware configuration dial on the base to
allow a unique (in the cascade) identifier to be set. This identifier is used by this configuration
page to configure the base camera number.
KBD
USB
NET
AUDIO
IN
VID 1 MON
B
VID 2 VID 3
SATA1
OUT
A
VID 13 VID 8 VID 6 VID 4 VID 5 VID 7 VID 9 VID 10 VID 12 VID 11 VID 14 VID 15 VID 16
ALARMS RELAYS SERIAL 1 SERIAL 2 SERIAL 3 PTZ SERIAL 4 PTZ
AUDIO
IN
OUT
EXP
O
I IR
MON A
HDMI 1
VID 17 VID 18 VID 19 VID 29 VID 24 VID 22 VID 20 VID 21 VID 23 VID 25 VID 26 VID 28 VID 27 VID 30 VID 31 VID 32
NET
SD Advanced
Layer3 Enhanced
CCTV Switch
Layer3 Enhanced
CCTV Switch
Layer3 Enhanced
CCTV Switch
Layer3 Enhanced
CCTV Switch
EcoSense NVR
Cameras Displays the camera numbers that have been assigned to
the switch by the Closed IPTV NVR. The NVR recognises
how many cameras are attached to the switch and assigns
cameras numbers accordingly.
Example Settings
Scenario 1 - One switch - 16 Analogue cameras attached to SD Excel CIP
Switch Hardware Setting No. of Cameras Base Camera Camera numbers
0 16 17 17-32
Scenario 2 - Two switches - 0 Analogue cameras attached to SD Excel CIP
Switch Hardware Setting No. of Cameras Base Camera Camera numbers
0 16 1 1-16
1 16 17 17-32
Scenario 3 - Two switches - 8 Analog Cameras (ports 7-16)
Switch Hardware Setting No. of Cameras Base Camera Camera numbers
0 8 1 1-8
1 4 17 17-20
Scenario 4 - Three switches - 0 Analogue Cameras
Switch Hardware Setting No. of Cameras Base Camera Camera numbers
0 8 1 1-8
1 4 9 9-12
2 4 13 13-1
Scenario 5 - Four switches - Geographically dispersed IP cameras
Switch Hardware Setting No. of Cameras Base Camera Camera numbers
0 4 1 1-4
1 4 5 5-8
2 3 9 9-11
3 5 12 12-16
Note: Analogue cameras connected to the rear of the unit will take priority over IP cameras connected
via a Layer 3 Enhanced CCTV Switch. An IP camera connected into a channel that is occupied
by an Analogue camera will be ‘bumped’ onto the Unallocated Cameras list to allow it to be
assigned to a free channel.
CIP Settings (Red) Select to open the Closed IPTV->Settings page
Refresh (Purple) Refreshes the information on the current page.