Dedicated Micros SD Excel, Руководство по установке

Страница: 108 / 232

108
SD Excel
Add Still Image This will record a still image of the trigger along with the standard
recording. This can then be sent on to an external destination.
Email Image If this option is selected, a JPEG will be added to the reporting email (if
Email Reporting is selected).
Protect alarm Images Alarm images can automatically be protected from being overwritten.
Switch Spot Monitor Select to display the alarm zone Primary camera on the Spot Monitor.
Goto Preset It is possible to action a camera to automatically be sent to a preset
position when an alarm is triggered.
Email Reporting The unit can send an email when an alarm is detected. Refer to
‘Network->Email’ for further information.
VMD/Activity Inhibit Select to inhibit (ignore) the VMD/Activity detection feature. Refer to
‘Alarm Settings->Activity Setup’ for further information.
Enable Buzzer Select to activate the unit’s internal buzzer upon alarm receipt.
Relay Select an onboard or external relay to automatically close on receipt of
an alarm.
Relay Duration Enter (in seconds) how long the relay is to remain closed.
Alarm Image Snapshot Delay This figure allows a delay to be introduced before an alarm snapshot is
taken. This is used when the alarm relates to a PTZ camera which has
to travel to a preset position.
Play Audio Message Following a Zone alarm trigger, a specific audio message
can be played.
IMPORTANT: Audio messages must be uploaded to the unit in mono 8k wav format only.
The following naming convention must be used: messageXX.wav
i.e. message00.wav, message01.wav etc.
An FTP client should be used to place the wav files in the following folder:
\mdd0\messages folder .
Switch Main Monitor Select to display the alarm zone Primary camera on the
Main Monitor.
Preset Camera Activate a telemetry camera to move to a preset position on receipt of
the alarm.
Preset Select the preset the activated telemetry camera (above) will move to.
Cam Options (Yellow) Select to open the Zone Action Camera Configuration menu.
Rem Report (Red) Select to open the Network->Remote Reporting menu
Email (Green) Select to open the Network->Email menu
Cam Options (Yellow) Select to open the Alarm->Zone Actions->Zone Action Configuration
menu
Relays (Blue) Select to open the Alarm->Global Actions menu
Refresh (Purple) Refreshes the information on the current page