Dedicated Micros SD Excel, Руководство по установке

Страница: 19 / 232

19
Installation Guide
Closed IPTV
Closed IPTV Camera Allocation
Analogue channels can be utilised by the BNC connections on the back of the unit OR by the sockets
on the Layer 3 Enhanced CCTV Switch. If an IP source is plugged into a channel occupied by a BNC
connection, the BNC will take priority and possess the channel, whilst the IP connection will be added to
an unassigned list, allowing it to be tied to an available channel through the configuration pages.
Individual cameras should be connected in sequential order, i.e. connect the first camera to port number
1 on the Layer 3 Enhanced CCTV Switch. When this connection is registered by the NVR, it will display
a notification on the Main Monitor showing the recognised details of the new video source, including
resolution, name and MAC address. There will also be a notification if a camera is disconnected.
Multi channel encoder camera allocation (DV-IP NV1)
A NetVu Connected multi-channel server can be can be added to any of the camera ports as a video
source. The available channels are then allocated as the Layer 3 Enhanced CCTV Switch detects video
sources on the NetVu Connected multi-channel server and allocates them to consecutive Port Free
channels, starting at the port on which the video source is added. If the process encounters a channel that
does not have “Port Free” status then the video source will be added to the un-allocated list; consecutive
cameras will only be applied to channels that are Port Free.
For example the Layer 3 Enhanced CCTV Switch has channel ports 1,3,4 listed as Port Free, 2 is an
Analogue camera. If one 4 channel ICR encoder is added to camera 1. The result is;
► ICR Encoder - Camera 1 -> Camera 1 NVR
◄ ICR Encoder - Camera 2 -> Unallocated, Cameras
► ICR Encoder - Camera 3 -> Camera 3 NVR
► ICR Encoder - Camera 4 -> Camera 4 NVR.
KBD
USB
NET
AUDIO
IN
VID 1 MON
B
VID 2 VID 3
SATA1
OUT
A
VID 13 VID 8 VID 6 VID 4 VID 5 VID 7 VID 9 VID 10 VID 12 VID 11 VID 14 VID 15 VID 16
ALARMS RELAYS SERIAL 1
SERIAL 2
SERIAL 3 PTZ SERIAL 4 PTZ
AUDIO
IN
OUT
EXP
O
I IR
MON A
HDMI 1
VID 17 VID 18 VID 19 VID 29 VID 24 VID 22 VID 20 VID 21 VID 23 VID 25 VID 26 VID 28 VID 27 VID 30 VID 31 VID 32
NET
SD Advanced
Layer3 Enhanced
CCTV Switch
Port reserved for
analogue
connections on NVR
Video source
added to
un-allocated list
NET 1 NET 0
POE IN
POWER VID IN SERIAL 1
SERIAL 2
1 3
4
Key
Port Free
Analogue Connection
Single IP connected
Single IP assigned
Multiple IP connection
2
When a multichannel encoder is connected to the Layer 3 Enhanced CCTV Switch, the NVR will receive
information from the encoder about how many cameras are connected. Channels set as Not Connected
on the encoder, when presented to the Enhanced Layer 3 switch will not be eligible for Auto IP.