Dedicated Micros SD Advanced Скачать руководство пользователя страница 79

Страница: 79 / 140

SD Adv

anc

Mode

The zone mode identifies when the reference image is taken for

triggering VMD. The options are:

Normal -

The reference image is updated approx

every second. This will only allow small

changes in the scene without triggering

Last trigger -

The reference image is only updated

when the VMD is triggered and is best

used under controlled lighting, i.e.

so there are no false triggers due to

ambient light changes.

Static -

The reference image is collected on

startup and is never updated. This

would be used in ‘sterile’ areas where

there are no changes expected.

Zone disabled -

This will disable the zone mode.

Pixel Count (%)

This value is set as a percentage and equates to the percentage

of pixels in the selected zone that must change for the VMD event

to be triggered. The default setting is 20%.

Pixel Change (%)

This setting is a percentage value of the overall change required

in the grayscale to be included in the pixel count. The percentage

change is defined over the complete range of black to white, a

100% pixel change would be from black to peak white. The default

setting is 20%.

Reload Image (Red)

This will update the reference image to the latest view during

set up.

Clear All (Green)

Removes all defined zones from the image.

Default Grid (Yellow)

Displays the default 16 zone grid across the whole image.

Содержание SD Advanced













































































































































Результаты поиска

Содержание SD Advanced

Отзывы:

Бренды по названию

Популярные бренды

Dedicated Micros SD Advanced, Инструкция по установке и эксплуатации

Результаты поиска

Содержание SD Advanced

Отзывы:

Бренды по названию

Популярные бренды