Dedicated Micros SD Advanced Скачать руководство пользователя страница 44

Страница: 44 / 140

SD Adv

anc

Display

This menu allows configuration of monitor settings used when viewing camera images and text data.

Main monitor text

It is possible to select text to be displayed on the main monitor.

The text displayed will include; time, date, mode of operation (Set,

Unset or Override), camera number and camera title.

Text Colour

The colour of the displayed text can be changed. Select from the

options available in the drop down list.

Background Colour

A black background appears by default around the text. It is

possible to change the colour of this background. Select from the

options available in the drop down list.

Sequence Dwell (secs)

The sequence dwell time can be set from 1 to 99 seconds. The

dwell time is the period a camera’s images are displayed before

switching to the next camera in the sequence.

Spot monitor text

It is possible to select text to be displayed on the spot monitor.

The text displayed will include; time, date, camera number and

camera title.

Spot Sequence Dwell

The spot sequence dwell time can be set from 1 to 99 seconds.

The dwell time is the period a camera’s images are displayed on

a connected spot monitor before switching to the next camera in

the sequence.

Spot Sequence Setup

All of the unit’s camera input channels are shown. To include any

of these camera channels in the spot monitor sequence, selected

the accompanying tickbox.

Содержание SD Advanced













































































































































Результаты поиска

Содержание SD Advanced

Отзывы:

Бренды по названию

Популярные бренды

Dedicated Micros SD Advanced, Инструкция по установке и эксплуатации

Результаты поиска

Содержание SD Advanced

Отзывы:

Бренды по названию

Популярные бренды