Dedicated Micros ICE series, Инструкция по эксплуатации

Страница: 8 / 16

Dedicated Micros ©2007
Domes
Controls and Switches
The DIP switches are located on the camera’s circuit board.
Dip Switches
Note: White indicates default switch position
Backlight Compensation
The Backlight Compensation (BLC) feature compensates for back-lit scenes by enhancing objects in
the centre of the scene which would previously have been in silhouette. Select ON or OFF using the
BLC switch. Default is OFF.
AGC (Automatic Gain Control)
The Automatic Gain Control (AGC) feature can improve picture quality when levels of illumination
are low. Select ON or OFF using the AGC switch. For most applications the AGC feature should be
ON and is therefore the default setting.
Electronic Iris
The Electronic Iris (EI) feature compensates for excessive light levels by automatically adjusting the
shutter speed. For auto-iris lenses, the EI should be set to OFF. For manual lenses, EI should be
ON.
Line Lock
Choose INT (internal) or LL (adjustable). The LL setting allows ±180° phase adjustment via the two
LL Phase Advance/Retard buttons. Default is LL.
Pressing both buttons simultaneously will reset LL to the factory default setting.
The LL setting can be adjusted using the LL potentiometer available on some versions of this
product.