6
NOTE: If the KD SCREW(S) do not fit during
assembly, loosen the 2 screws to adjust the
PLASTIC CONNECTOR until the PANELS/KD
SCREWS can be installed.
Step 3: Attach the SIDE PANELS [C] to the
FRONT PANELS [D] with 4 KD SCREWS as
shown in Fig. C. (2 screws for each side)
Step 4: Attach the LEFT and RIGHT SIDE
PANELS [C and D] to the BASE [B] using 4
KD SCREWS. (2 screws for each side) See
Fig. D
Step 5: Place the UPPER FRONT PANEL
[E] over the FRONT PANELS [D] with 4 KD
SCREWS. (2 screws for each side) See Fig. E
Step 6: Install the TOP PANEL [A] to the unit
as shown and attach with 3 KD SCREWS.
See Fig. F
Step 7: Attach the LOWER PANEL [F] on the
BASE [B] with 2 KD SCREWS. See Fig. G
A S S E M B LY I N S T R U C T I O N S
fig. D
fig. B
fig. C
fig. E
fig. F
fig. G