5
MANTLE AND
INSERT ASSEMBLY:
WARNING: Make sure the fireplace INSERT
controls are in the OFF position and the
INSERT is NOT plugged in.
CAUTION: Place a piece of cardboard or
protective sheet on the floor in order to avoid
scratching the decorative surface of your
mantle during assembly.
Please DO NOT fully tighten the KD screws
until all panels are assembled.
Step 1: Attach 2 CONNECTOR [S] to the FRONT
PANEL [D] with 4 KD SCREWS.
(2 screws for each side) See Fig. A
Step 2: Attach all PLASTIC CONNECTOR [X]
to the PANELS [C, D and E] as shown in Fig.
B. (2 screws for each PLASTIC CONNECTOR)
A S S E M B LY I N S T R U C T I O N S
PARTS LIST:
A) Top panel
1
B) Base panel
1
C) Side panel
2
D) Front panel
2
E) Upper front panel 1
F) Lower panel
1
S) Connector
2
V) Mounting bracket 6
W) KD screws
53
X) Plastic connector 13
Y) SELF REPAIR SET
Touch-up repair paint (bottle)
L shape bracket
8
Screws for L shape 32
Plastic Connector
1
KD Screws
3
KD Nuts
3
Z) WALL ANCHOR SAFETY
CABLE
Wall Anchor
1
Screw for wall anchor 1
Screw for mantle
1
Safety cable
1
TOOL REQUIRED: PHILLIPS HEAD SCREWDRIVER
fig. A
