deconta decontamination mobile D 3000, Руководство пользователя

Страница: 5 / 52

Guide book
D 3000 / 4000 / 5000
Seite 5
1.3 Regular controls and maintenance
Axle
After 1500 km or 6 months

Have the axial play of the hub bearing checked and
adjusted, if necessary.
Every 10000 km or every 12 months

Check wheel brake linings of wear via the inspection
hole (see adjacent picture). Adjust if necessary. Where
continuous travel in hilly regions or high mileage is
experienced, earlier inspection and adjustment may be
necessary.

Check quantity and quality of grease of the tapered
roller bearing, renew if necessary.
N.B. All necessary service work should be carried out by
trained personnel in specialist workshops or service stations.
Please also obey the corresponding guide book of company AL-KO Fahrzeugtechnik
GmbH.
Overrun device
Every 10000 – 15000 km or every 12 months

Lubricate/grease all sliding and moving parts
of the overrun device as shown in the
adjacent picture.
Please also obey the corresponding guide book of
company AL-KO Fahrzeugtechnik GmbH.
Coupling head
Weekly or when obviously dirty

Control the coupling head and clean if necessary.
Lubricate/grease the ball cup, joints and bearings.
Lubrication points see adjacent picture.
Please also obey the
corresponding guide book of
company AL-KO Fahrzeugtechnik GmbH.