71
6
Purpose of Operation
Operation Method
Parameter Status during Operation
and Its Meaning
[13]
[Joystick Dead Zone]
Set the size of the dead
zone for the joystick
operation.
The dead zone is “the
range in which the
wheelchair does not move”
from when the user starts
to tilt the joystick until the
wheelchair begins to move.
Speed switch
If the desired parameter is blinking,
the following operation is not
necessary.
If a different parameter is blinking,
briefly flip the speed switch up or
down until the desired parameter is
blinking.
The buzzer sounds briefly only when
a setting has been changed.
You can redo this as many times as
you wish.
Narrow (50% of standard)
Standard (default setting)
Slightly wide
(150% of standard)
Wide (200% of standard)
Very wide
(300% of standard)
Proceed to ne
xt
Bac
k to pre
vious
Briefly tilt forward
once.
Briefly tilt toward
you once.
