Decon wheel e-drive Скачать руководство пользователя страница 70

Страница: 70 / 71

WARNING!

If the instructions are not followed, injury to the user and/or damage to the
wheelchair may result.

•

Always use the overturn protection.

•

Do not lift the chair by the battery, battery holder, cable or pushrims.

•

Do not let children or people not familiar with e-drive use the wheelchair.

This product has been supplied from an environmentally aware manufacturer that

complies with the Waste Electrical and Electronic Equipment (WEEE) Directive

2002/96/CE.

This product may contain substances that could be harmful to the environment

if disposed of in places (landfills) that are not appropriate according to

legislation.

Please return the whole product (wheels, battery and charger) to Decon Wheel

or your dealer for recycle the product properly.

For ordering the e-drive and spare parts, please contact Decon Wheel or your local

dealer/service centre.

Manufacturer:

Decon Wheel AB

Landerydsvägen

S-314 33 Hyltebruk

SWEDEN

Tfn. + 46 (0) 345 408 80

[email protected]

www.decon.se

Содержание e-drive








































































Результаты поиска

Содержание e-drive

Отзывы:

Похожие инструкции для e-drive

Бренды по названию

Популярные бренды

Decon wheel e-drive, Руководство пользователя

Результаты поиска

Содержание e-drive

Отзывы:

Похожие инструкции для e-drive

Бренды по названию

Популярные бренды