GUARANTEE AND MAINTENANCE
.
Guarantee:
•
The complete product has a 2-year guarantee
Maintenance:
•
Do not spray water onto the machinery
•
Wipe clean the wheel axles and lubricate them with a little oil.
•
Tighten the spokes once a year.
•
Check nuts and screws regularly and tighten them when necessary (this
applies to all lose parts).
•
Wipe the frame with a soft cloth and detergent.
•
Check the chair once a week for: cracks in the frame, loosening of
components, loosening/breakage of the spokes, effectiveness of the brakes,
deformation of casters and the wear of the tires. If any damage occurs, please
contact Decon Wheel immediately.
•
An authorised person or Decon Wheel must carry out all technical servicing.
•
Only original components or those, which meet Decon Wheels specifications,
are to be used.
•
Store the wheelchair with the battery detached. The detached battery should
be stored with the protective cap on. There is a danger of a short-circuit when
the connecting portion is exposed. Do not store the wheelchair with the e-
move on, where it is subject to rain, direct sunlight or high humidity.
Reuse of the e -Drive
When the e-drive is being transferred to another user, the wheels, nuts and the battery pack
are to be removed from the wheelchair. The nuts should be cleaned with a non-abrasive
cleaner and sprayed with a little oil. Pack the parts and label them with the type of wheelchair
they have been installed on.
On the e-drive, remove the tyres, tubing and the drive ring. Clean the entire wheel with a non-
abrasive cleaner. If the e-drive has not been serviced in the last year, send it for servicing to
Decon Wheel or other authorised service centre. If the e-drive has been serviced in the last
year, check all the screws and nuts and tighten as necessary. New drive rings, tyres and tubes
should be installed. The spokes should be checked and replaced or tightened as needed. The
QR axel should be inspected and tested. The battery should be checked for damage, tested in
its charger and charged fully. Check to make sure the wheel operates properly and the length
of the battery charge when fully charged.
Waste disposal of the e -drive
The e-drive comes in packaging, which should be recycled.
When the e-drive has reached the end of its life, remove the tyres and tubes, and drop off at a
recycling centre. The cables and other electrical equipment should be recycled as electronic
waste. The other parts of the e-drive are to be recycled with other metallic waste.
11
