background image

3

AFTER SALES SUPPORT:

AUS

MODEL: PRG500J  PRODUCT CODE: 10562  09/2019

[email protected]

1300 889 028

1.APPLICATION

First time users or inexperienced operators pay particular attention to the operation of the 

500W Paint S  Spray Shelter in Carry Bag, including details of starting and stopping 

and correct use of the 500W Paint S  Spray Shelter in Carry Bag on pages 9-14, as 

well as the maintenance instructions on pages 14-15.   

Intended use of 500W Paint S  Spray Shelter in Carry Bag  

NOTE:

 This product is for private domestic DIY use only. It is not suitable for commercial or 

trade use. 

This 500W Spray gun is used for spraying non-flammable and non-hazardous paints and 

varnishes and is suitable for small to medium projects including walls, ceilings, cabinets, 

fences etc. 

NOTE: 

 

This tool is suitable for solvent-based and water-based paints, finishes, primers, two-

component paints, varnishes, automotive topcoats, stains and wood preservatives. 

 

It is not suitable for alkali, acidic paints and the paints of which flash point is under 21

O

C.

WARNING: 

The tool cannot be used for spraying of flammable liquids. 

Do not use the tool for the food, pharmacy or other purposes that are not 

mentioned in the manual.  

Содержание PRG500J





















Отзывы: