Deco Style PRG500J, Руководство пользователя

Страница: 10 / 20

10
AFTER SALES SUPPORT:
AUS
MODEL: PRG500J PRODUCT CODE: 10562 09/2019
info.aldi@positecgroup.com
1300 889 028
The table below shows recommended run-DIN-seconds
dilutions for different types of liquids.
NOTE:
• This tool is suitable for solvent-based and water-
based paints, finishes, primers, two-component
paints, varnishes, automotive topcoats, stains and
wood preservatives.
• It is not suitable for alkali, acidic paints and the
paints of which flash point is under 21
O
C.
Solvent-based paints.............................................15-50
Primers..................................................................25-50
Pickling .............................................. no need to dilute
2 Component paints ........................................... 20-50
Varnishes ............................................................. 15-40
Waterborne paints ...............................................20-40
Automotive topcoats .......................................... 20-40
Wood preservatives .......................... no need to dilute
If the paint takes longer than the recommended time to
empty, then further thinning is required. Mix in a small
quantity of the appropriate thinner and use the viscosity
test until the correct thickness is achieved.
7.2 Assembling the paint container (5)
1) Remove the paint container (5) by unscrewing it in
clockwise direction from the spray gun.
2) Fill the paint container (5) with paint of the correct
viscosity.
3) Adjust the suction pipe (10) direction correctly
according to different operating conditions to deplete
the material in the paint container (5) as much as
possible. Details refer to 7.3.
4) Fill the paint container (5) with prepared paint. Do not
overfill. The maximum capacity is 900ml.
5) Assemble the paint container (5) back to the paint
sprayer by screwing it tightly in an anti-clockwise
direction.
Fig.2-1
Fig.2-2