8-15-2018 K68622704
5
www.mopar.com
PREPARE BED:
INSTALL SHIMS
• There are
2 SHIMS
provided:
• Using the information in the respective circular detail views:
a) Clean the surfaces thoroughly where the shims will be located (isopropyl alcohol is
recommended).
b) Remove the layer of tape on the bottom of the shim to expose the adhesive surface.
c) Place the shim and apply with pressure.
NOTE: Repeat DETAIL A passenger side.
CABSIDE
TAILGATE
DETAIL A
Center shim between floor beads shown.
Place shim 2” from cabside panel (blue).
Repeat on passenger side.
2”
A
