SI-3C
™
U
ser
’s M
anual
21
7 . Click on the "File" tab and then click on the "Open" button .
Figure 4.5g
Press the Open button
8 . The "Please select a file" screen will appear . From the screen
select the firmware file from where you have saved it on your
hard drive .
9 . Press the "OPEN" button .
10 . Press the "Program and Configure" button if you want the SI-
3C™ to accept the changes that have been made to the "SI-3C
Configuration Items" screen
and
to program the SI-3C™ with new
firmware .
Figure 4.5h
Program and Configure button
11 . Within 3 seconds of pressing the CONFIGURE button, apply
power to the SI-3C™ unit .
12 . The Configure program will update the SI-3C with new firmware
and any configuration changes made and start .
4.6 Configuration Notes
All changes occur immediately and do not require a reboot of the
SI-3C™ to become operational .