GS3
1
INTRODUCTION
Output: Serial TTL, 3.6 Volt Levels or SDI-12
Operating Temperature: -40 to 60
◦
C
1
Connector types: 3.5 mm (stereo) plug or stripped & tinned lead
wires (Pigtail)
Cable Length: 5 m standard; custom cable length available upon
request
1.3
Warranty
The GS3 has a one year warranty on parts and labor. The warranty
activates when the instrument arrives at your location.
Seller’s Liability
Seller warrants new equipment of its own manufacture against defec-
tive workmanship and materials for a period of one year from date of
receipt of equipment (the results of ordinary wear and tear, neglect,
misuse, accident and excessive deterioration due to corrosion from
any cause are not to be considered a defect); but Seller’s liability for
defective parts shall in no event exceed the furnishing of replacement
parts F.O.B. the factory where originally manufactured. Material
and equipment covered hereby which is not manufactured by Seller
shall be covered only by the warranty of its manufacturer.
Seller shall not be liable to Buyer for loss, damage or injuries to
persons (including death), or to property or things of whatsoever
kind (including, but not without limitation, loss of anticipated prof-
its), occasioned by or arising out of the installation, operation, use,
misuse, nonuse, repair, or replacement of said material and equip-
ment, or out of the use of any method or process for which the same
may be employed. The use of this equipment constitutes Buyer’s
acceptance of the terms set forth in this warranty. There are no
understandings, representations, or warranties of any kind, express,
implied, statutory or otherwise (including, but without limitation,
1
Sensors can be used at higher temperatures.
Please contact Decagon for
assistance.
3
