manualshive.com logo in svg

DEC Digital HiNote Ultra 2000 series, Справочное руководство по обслуживанию, Страница: 77 / 131

Поделиться
Скачать
DEC Digital HiNote Ultra 2000 series Скачать руководство пользователя страница 77

Troubleshooting

4-4

Power Supply Failure

Problem

Troubleshooting Procedure

You turn on the power
switch and the following
conditions apply:

• 

There is no panel
display

• 

There is no noise
coming from the
HDD

• 

The power
indicator light is off.

If you are operating the notebook
computer using the battery:

• 

The system could be in suspend.
Press the Suspend/Resume
button.

• 

The battery connection is loose.
Remove and reinstall the battery.

• 

The battery power is depleted.
Plug in the AC adapter, or replace
the battery.

• 

The battery needs to be reformed.
Reform the battery.

• 

The system could be experiencing
a hang.  Press the reset button
(Figure 1-3).

If you are operating the notebook
computer using the AC adapter:

• 

Check that the AC adapter is
plugged into an operational power
supply.

Check that the AC adapter is connected
securely to the notebook computer’s AC
adapter socket.

continued

Содержание Digital HiNote Ultra 2000 series




































































































































Отзывы:

Нет отзывов