DEC Digital HiNote Ultra 2000 series Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 131

DEC Digital HiNote Ultra 2000 series Скачать руководство пользователя страница 17

Overview

1-8

UMI Controller

The DIGITAL HiNote Ultra 2000 notebook computer has an
internal type II PCMCIA slot that is available as an UMI slot.
This feature provides a flexible method for the support of an
internal modem that minimizes the impact of multi-national
modem approvals. This slot supports only DIGITAL approved
modem cards. The UMI interface is provided by the Cirrus Logic
CL-PD6722 dual slot PCMCIA controller (Only one slot is used.)
This chip provides the following features and functions:

•

PCMCIA 2.1 and JEIDA 4.1 compliant.

•

Automatic low power mode (improved power
consumption).

•

Direct connection to the ISA bus and PCMCIA socket.

•

Five programmable memory windows and two I/O
windows.

•

DMA support.

Docking Options

The DIGITAL HiNote Ultra 2000 notebook computer supports
docking options. Active docking options are required to have a
NILE PCI-PCI bridge.

DIGITAL HiNote Ultra Multimedia Dock

The DIGITAL HiNote Ultra Multimedia Dock has the following
features:

•

Three speakers: two tweeters and one sub-woofer.

•

Super I/O duplication for port replication the DIGITAL
HiNote Ultra Enhanced Port Replicator.

•

Nile I PCI-PCI bridge.

•

PicoPower V3 PCI-ISA bridge.

«
...
15
16
17
18
19
...
»

Содержание Digital HiNote Ultra 2000 series




































































































































Отзывы:

Нет отзывов