DEC DECrepeater 90T, Руководство пользователя

Страница: 33 / 62

Management 25
SHOW PORT [hub number,] slot number, port number
Shows whether the port is enabled or disabled and the operational status
of the port. Hub numbers can be 1 or 2; slot numbers can be 1 through
8. For the DECrepeater 90T, port numbers are 1 through 8; for the
DECrepeater 90C, port numbers are 1 through 6.
The following example displays the expected response to a SHOW PORT
command. Notice that the hub was not defined in the command so the
default (1) was used.
DECbridge>SHOW PORT 3,2
Hub 1 slot 3 port 2 segment counter 0 status: disabled-no carrier loopback
The following example displays a SHOW PORT command for hub 2.
DECbridge>SHOW PORT 2,3,2
Hub 2 slot 3 port 2 segment counter 0 status: operational
SHOW REPEATER [[hub slot number,] slot number]
Shows the type of repeater and the port status for each port on that
repeater. The hub number may be 1 or 2, and slot numbers are in the
range of 1 through 8. If no parameters are given, information displays for
all repeaters in both hubs.
The following example displays the expected response to a SHOW
REPEATER command. Notice both DECrepeater 90T and DECrepeater
90C repeaters are installed in the hub.
DECbridge>SHOW REP
Hub 1 slot 3 twisted pair, repeater, rev.1, 8 ports.
Hub 1 slot 4 ThinWire repeater, rev.1, 6 ports.
Hub 2 slot 3 ThinWire repeater, rev.1, 6 ports.
Hub 2 slot 6 twisted pair repeater, rev.1, 8 ports.
Hub 2 slot 8 twisted pair repeater, rev.1, 8 ports.
The following example displays the response to a SHOW REPEATER
command to a slot that contains a device other than a repeater.
DECbridge>SHOW REPEATER 1
No repeater responds.
The following example displays the response to a SHOW REPEATER
command to an empty slot.
DECbridge>SHOW REPEATER 7
No repeater responds.
Digital Internal User Only