DEC DECrepeater 90T, Руководство пользователя

Страница: 37 / 62

Management 29
DEChub 90
DECrepeater 90T DECBridge 90
LJ-00956-TI0
Port 1
Port 2
Port 3
Port 4
Port 5
Port 6
Port 7
Port 8
Node - Address - Username
Node - Address - Username
Node - Address - Username
Node - Address - Username
Node - Address - Username
Node - Address - Username
Node - Address - Username
Node - Address - Username
Slot 1 DECrepeater 90C
Port 1
Port 2
Port 3
Port 4
Port 5
Port 6
Port 7
Port 8
Node - Address - Username
Node - Address - Username
Node - Address - Username
Node - Address - Username
Node - Address - Username
Node - Address - Username
Node - Address - Username
Node - Address - Username
Slot 2
Port 1
Port 2
Port 3
Port 4
Port 5
Port 6
Port 7
Port 8
Address
Address
Address
Address
Address
Address
Address
Address
Slot 8
Management is accomplished by establishing a MOP Console Carrier
session with the bridge from any remote node.
Once connected to the bridge, the following prompt displays:
DECbridge>
Whenever a bridge goes through a power cycle or is reset, the bridge
begins to poll repeaters for status. This includes a special algorithm
for determining the ports on repeaters to which particular stations are
attached. This algorithm takes a varied amount of time to complete. The
time depends on the number of repeaters and the network activity. For
this reason, time should be allowed to elapse before proceeding from this
point to manage the hub. Also, for this reason, when stations or repeaters
are moved in the hub, it may take time before they are reported. See
Appendix C for further details.
Example of a typical management scenario
1. Determine what repeaters are in the hub as follows:
DECbridge>SHOW REPEATER
Hub 1 slot 5 ThinWire repeater, rev.0, 6 ports.
In this case, there is a ThinWire repeater (DECrepeater 90C) in the
same hub as the bridge (if this was a 2 hub configuration) in slot 5
with 6 ThinWire ports.
2. Determine what stations are connected to the repeaters in the hub by
entering the following command:
DECbridge>SHOW ADDRESS
Address 1: 08-00-2B-19-94-FB
Address 2: 08-00-2B-1E-2D-0C hub 1 slot 5 port 3
Digital Internal User Only