DEC DECrepeater 90T, Руководство пользователя

Страница: 21 / 62

INSTALLATION 13
Install and Verify Devices.
NOTE
The DECrepeater 90T performs the crossover twisted pair
cable function internal to the unit. Point-to-point wiring is
used when connecting a device to any of the twisted pair
ports.
1. Connect devices to the repeater ports using the 8-pin MJ Connectors.
The port LEDs illuminate.
NOTE
When the repeater port is properly terminated and network
activity is first received the port LED illuminates.
2. Verify the operation of each port by sending information to the device
being tested.
Backplane Installation
To install the DECrepeater 90T in the DEChub 90 Ethernet backplane,
perform the following procedure:
1. Remove the back cover of the unit.
a. Insert a small screwdriver into the top mounting hole located on
the cover.
b. Lift the internal latch with the screwdriver and pull the cover
away and down from the top of the unit.
Digital Internal User Only