Installing a BA42 Storage Expander Upgrade
2.3 Installing an RF3x-EK Hard Disk Drive
Figure 2–12 Fastening an RF3x-EK Hard Disk Drive in the Expander Box
MLO-010047
1
2
Metal spring tab
Rubber drive shipping bracket support
2.3.7 Replace the Cover on the Expander Box
Position the cover so it rests on top of the box about 3 inches short of the back
of the box. Move the cover straight toward the back of the box until it slips
into place (see Figure 2–13). Tighten the two cover release screws on the back
of the box and plug in the power cord.
Caution
Make sure the internal cables are pushed down into the box before
replacing the cover. Closing the cover on the cables may damage the
cables.
2–14 Installing a BA42 Storage Expander Upgrade
