Installing the BA42 DSSI Storage Expander
1.7 Connecting One Expander to Another Expander
1.7.2 Remove the Terminator from the Expander Box
Remove the terminator from the last expander box attached to the DSSI
connector on the system unit by squeezing the release tab on the sides of the
terminator and pulling the terminator out of the connector (see Figure 1–11).
Figure 1–11 Removing a Terminator from an Expander
1
MLO-010023
DSSI terminator
1.7.3 Connect the DSSI Expander Cable and Terminator
1. Connect the three-foot DSSI expander cable to the empty connector on the
last box connected to the system unit.
2. Connect the other end of the cable to the left-hand connector on the box
you are installing.
3. Connect the terminator to the empty connector on the final expander box.
Installing the BA42 DSSI Storage Expander 1–15
