Installing a BA42 Storage Expander Upgrade
2.3 Installing an RF3x-EK Hard Disk Drive
2.3.2 Determine the Drive Location
Each RF3x-EK hard disk drive must be placed in a specific location within the
BA42 expander box. Figure 2–3 shows the appropriate location for the first
and all subsequent drives.
Figure 2–3 Drive Locations Inside the BA42 Expander Box
MLO-010032
1
4
2
3
2.3.3 Connect the 50-Pin DSSI Cable
Connect the appropriate 50-pin DSSI connector to the drive (see Figure 2–4).
The keyed tab on the bottom of the connector slides into the corresponding slot
on the drive. The drive must only be attached to the DSSI signal cable with
the appropriate connector for that drive (see Figure 2–5 to determine which
connector to use for each drive).
Installing a BA42 Storage Expander Upgrade 2–5
