12
6 PROGRAMMING
1
Power Supply
Turn on the power supply, the courtesy light flashes for a few seconds and the display shows numbers “
” to “ ” followed by the standby
symbol “- -”.
88
-
77
- 6
6 - 55 - 44 - 33 -
22
2 Motor stroke learning
1. Press on the
key until the display shows
P1;
2. Confirm by pressing the
key;
3. When “ ” is shown, press the keys
/
so the door opens (“
” flashes);
Confirm the opening position by pressing the
key;
4. When “ ”, appears, press the keys
/
so the door closes (“
” flashes);
Confirm the closing position by pressing the
key;
5. The door automatically opens and closes loo-
king for the opening/closing positions;
6. The display will show “- -“, programming com
-
plete.
3
Deletion of memorized transmitters
1. Press and hold the
key (display shows “ ”) for 8 sec. until
you see “ ” on the display;
All remotes previously memorized will be deleted;
Warning:
After 20 memorized codes (upper limit), the display shows
“ ”.
4
Transmitters learning
1. Press and hold the
key until the display shows “ ”;
2. Press the remote key you want to learn, then release it and press
a second time (the display shows “
” flashing);
3. The display will show “- -”, learning complete;
4. Repeat this procedure to learn other remotes up to a maximum
of 20 codes;
Warning:
After 20 memorized codes (upper limit), the display shows
“ ”.
