DDS CALORIMETERS
Manufacturers of CAL2K/CAL3K Oxygen Bomb Calorimeters
CAL3K-A INSTALLATION GUIDE V1.1 |
In addition each unit retains statistical and max data. Most of this information is visible via the PC interface. Some of
this information is ‘attached’ to the CAL3K-A chassis, some of it is contained on the control card, and a different data
set is in the vessel.
If a vessel, chassis, or control card is replaced in the field then some of the product identification may be different
from what our records reflect and we need your assistance to inform us accordingly.
WARRANTY – FOR NEW PRODUCTS
PURPOSE OF PRODUCT WARRANTY
Any part of a product is subject to ageing and eventual failure. These failures occur during normal use. The purpose
of a warranty is to protect the Owner against a part failure caused by manufacturing defects in workmanship,
material or design for a specific time.
OWNER’S WARRANTY
In the event of the Owner contracting directly with Digital Data Systems (Pty) Ltd “dds”, or in the event of the
installation of a unit arising out of a contract between the Owner’s Dealer or any other party on his/her behalf and
the said “dds”, the Owner records that not withstanding same, this warranty is the only warranty applicable to “dds”
units and is expressly in lieu of all other warranties, expressed or implied, including any implied warranty of
merchantability or fitness for a particular purpose. No amendments or additions to this warranty shall be binding on
“dds”, unless recorded in writing and signed by a duly authorised officer of the company. “dds” agrees to repair and
replace with a new or remanufactured part, any part, other than those excluded below, which after inspection,
upon its return to the factory in Randburg, Johannesburg by the Owner or the authorised Dealer to which he/she
returns the unit, is proven to be defective.
Replacement of a defective part will be made only within the applicable warranty period of 12 (twelve) months from
date of shipment. Not withstanding anything to the contrary herein, any labour involved in repairing or replacing a
defective part will be charged at “dds” rates applicable at the time.
If upon inspection it is found that the pressure vessel was submerged in water the warranty will automatically be
null and void and the owner will be responsible for the labour and parts charges.
EXCLUDED (NON-WARRANTY) PARTS
“dds” shall be entitled to treat this warranty as void unless the relevant warranty form (attached) is sent by
registered post to “dds” by the Owner within 10 (ten) days from date of original installation.
Regardless of warranty-status, the Owner shall be responsible for labour charges connected with periodic
maintenance requirements involving visual and functional inspection of the systems.
This warranty expressly covers the unit(s) “dds” supplied only and does not cover any other part, which may, as a
consequence of the installation and operation of the unit, become damaged in any way whatsoever.
Special attention should be given to the safe operation of the high-pressure Vessels. The published rules are
guidelines only and enclosed in this leaflet for the convenience of the User. The manufacturer is not responsible