DDS CALORIMETERS
Manufacturers of CAL2K/CAL3K Oxygen Bomb Calorimeters
CAL3K-A INSTALLATION GUIDE V1.1 |
TERMINATE USER TEST
If a user test ‘hangs’ on a problem, then pressing this key terminates it. It is a little more powerful then
Esc.
CAL3K-A USER TEST
This tests the CAL3K-A hardware.
The test cycles through all tests and checks the hardware connections and functionality. A Vessel is not required.
Some interaction is required.
SUBJECT HELP
Every time that the unit waits for an action, a more detailed subject help is available to explain what is
needed.
Press
whenever something does not progress and read the comments.
OTHER KEYBOARD COMMANDS
Here are some handy commands, which have to be typed. The Unit checks the typing, and if no ambiguity exists it
will complete the command for you.
ABORT
This is a reset. The unit terminates ALL operations and starts fresh.
FIRE MANUAL
This can be used to shorten the initial period. The firing conditions are circumvented and the Vessel charge is ignited.
Useful to test the firing/ignition procedure
CALIBRATION
This directs the unit to perform a calibration procedure with the next sample. During this procedure the Sulphur
correction (if set) is disabled.