DDN Storage StorageScaler8460, Руководство пользователя

Страница: 10 / 24

4.0 Removal of Disk Modules and Enclosure
CAUTION :
Whenever handling disc modules ensure that the disk modules are at
room temperature before installing ore removing and powering up the SS8460.
It is recommended that the disks are allowed at least two hours at installation
and thirty 30 minutes after power down to acclimate to room temperature.
Figure 8 shows the layout of disks in the SS8460. The disk layout may also be
found inside the cover of the enclosure. Refer to Appendix B for information on
zoning configuration.
1. Prepare an area such as a table located in close proximity to the SS8460 you
are working on for placement and temporary storage of the removed disc
modules.
NOTE : It is highly recommended that each disc module and blank
be labeled with its current installed location within the SS8460 prior to
removal.
2. Store the drives in an area so that they remain acclimated to room
temperature. Drives and new replacement enclosure must be acclimated to
the same room temperature before drives can be reinstalled into the
replacement enclosure.