Data Device Corporation
BU-65570/2i Manual
5
HARDWARE INSTALLATION
The BU-65572iX card is a PCI Target device and may be inserted into
any PCI 2.1, or higher, compatible slot. When installing the card, the
following should be observed:
NEVER insert or remove the card with the power turned on.
ALWAYS take proper precautions to guard against static damage. Use
a wrist strap if available, or ensure proper static grounding by touching
the power supply cover WITH POWER OFF.
Insert the card at a slight angle so that the connectors first protrude from
the rear opening and then gently press the card into the motherboard
connector. Secure with proper hardware.
Make sure that adjacent cabling and wiring do no hinder the airflow
around the card.
The BU-65572iX does not contain any configuration jumpers for
selection of bus connection. Selection of direct or transformer coupling is
performed by way of functions provided in the RTL. In addition to this,
there are no jumpers needed for card installation, as the BU-65572iX is
a true Plug and Play design. Interrupts and memory selections will be
performed by the operating system as the boot system progresses.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
