DCSENG S-CM4_M, Руководство пользователя

Страница: 7 / 31

S-Cutter
7
● Be sure to apply our supplied product and insert tip only for their intended uses.
Use only products certified for their quality (state-certified or higher-quality) in the event
there is difficulty in procuring our products and accessories.
If violated, performance degradation and serious injury may occur.
● Do not leave the product rotated.
workers may result in bodily injury.
● Place cutting chips safely.
When cutting chips meet flammable substances, it may cause fire and burns.
● Wear gloves and long-sleeved clothes to wear.
Scattering chips can cause burns.
● Use Extension cord as short as possible.
If too long or too thin, it may cause overload.
● Operation before commissioning.
Check the machine before use for safety.
● Do not pour water or cutting fluid.
Due to water or other liquids on the electric motor, electric shock, or death may
occur.
● Do not use tools in wet conditions or rain.
Serious injury or death may occur by electric shock.
● Avoid fingers, hands or clothes to touch the blade while operating.
When fingers, hands, or other body parts stuck in the machine, it may occur serious
injury.
● Avoid fingers, hands or other body parts to touch where pipe and roller meet
while operating.
When fingers, hands, or other body parts stuck in the machine, it may occur serious
injury.
● Before supplying power to the product, be sure to turn off the operation
switch.
Plugging in with the switch on may cause sudden rotation and occur serious injury.
● Do not let any part of body to touch the compression device of product.
Serious injury may result.
● Make sure to wear safety equipment.
Chips generated during the operation may scatter and cause serious eye injury.
Warning
Caution