DCSENG S-CM4_M, Руководство пользователя

Страница: 4 / 31

PIPE(TUBE) CUTTER Of Best Technology
4
www.s-cutter.co.kr
10 Do NOT abuse the cord.
Do not drag the product by pulling the electric cord.
Do not unplug the cable by pulling the cord itself.
Keep the cord safe from heat, oil and sharp edges.
11
Install the anti-scattering protector of cutting chips.
Fire might occur if cutting chips touch the inflammable, and burning might
occur if it touches the body.
spattering chips during work might cause injury to other workers around the
working spot.
12
Pay attention to your work.
Please note the fall and cut piping pinch.
13
Manage the product carefully.
Keep the product clean and efficient for safe operation.
Manage with the proper lubricant, apply a corrosion inhibitor to prevent
corrosion when not in use for a long time.
When replacing the management regulations and tools, comply with the
instructions.
Check plugs and wires regularly and contact experts to repair the damage.
Check connection cables regularly and replace damaged parts.
Keep the control board dry and avoid getting oil or grease.
14
Remove from power source.
When not in use, checked or replaced, turn off the switch.
15
Please check before operation.
Make sure that the tool(insert tip) has been tightened.
16
Be careful of operating the machine accidently.
Do not carry when the power is connected.
When turning on, make sure that the operation switch is off.
17
Electrical cable for connection outdoors.
Use the authorized extension poser cord with a qualifying mark.
Do not connect the currently used cable to other equipment.
Have a separate circuit breaker.