DCSENG S-CM4_M, Руководство пользователя

Страница: 27 / 31

S-Cutter
27
8. Product specifications
● During the flat processing of plate and pipe with S-CM4_OD, it does not match with
processing width marking certainly. In other words, maximum processing width is
smaller for the pipes with smaller diameter compared to the pipes with larger
diameter even after the processing with the same processing depth since the
contacting section of insert tip is different in accordance with the diameter of pipe.
Values of maximum processing width per diameter of pipes are entered into the
data for the machine specification processing capacity(pipe), and you can use it as a
processing reference value.
● Please refer to the machine specification table or contact the head office for the
details about the processing capacity.
● Machine Specifications
Work
capacity
Processing type
Pipe
Minimum O.D 1inch(25A)
Maximum O.D No limit
Plate No limit
Materials General steel, stainless, plastic, etc.
Depth adjustment
One-touch method
(loosening prevention, ball plunger method)
Processing depth 0.05mm as a minimum unit
Machine
capacity
Processing angle
0-90°
Penetrating angle
75°
Processing depth Minimum is 0.05mm, maximum is 15mm
Processing capacity
Processing material Width (mm)
Plate
Minimum 18
Maximum 48
Pipe
(When processing
0.3mm)
50A 27
100A 29
200A 31
300A 33
500A 43
Machine
specification
Total weight
6.0Kg
Output
AC 200-220V/50-60Hz/1050W
Size 85×85×185H
Effectiveness factor
4EA(S501306-CM4-780) - Possible to use 4 surfaces
· Design and specification of this product are the version as of August 2014.
· The data may be subject to change for product improvement without a prior notice.
· Be sure to read through safety precautions described in the user manual and the equipment
before using our products.