DCSENG S-CM4_M, Руководство пользователя

Страница: 28 / 31

PIPE(TUBE) CUTTER Of Best Technology
28
www.s-cutter.co.kr
1. Be fully aware of the cautions for the safe usage.
2. When maintaining or inspecting, please remove the power plug
3. Inspection of the screw device for each part.
Regularly check that the device on each part where the screw is
loosened. If screws are loosen, tighten firmly. It is very dangerous to
leave them loose.
4. S-CM4 requires the regular inspection and replace since it is a brush
motor type.
5. Do not keep the equipment in a moist area(risk of electrical short).
6. Be cautious with handling since drop or impact is the cause of
equipment breakdown.
7. Disconnect the power during the equipment inspection or while the
equipment is not being used.
8. Carbon brush inspection and changing method
8-1. As shown in the picture, loosen the (+) type screw tightened to the
bottom of motor, and open the motor by pulling the cover of motor
toward the bottom.
(+) Screw
Carbon brush
Case
8-2. Replace the carbon brush if it is worn out after the inspection, and
make sure the cover is reinstalled before using.
9. Maintenance and inspection