14
INSTALLATION
CART ASSEMBLY INSTRUCTIONS
FIG. 11 Grill head should rest over rear cart
flange as shown above.
FIG. 12 Secure grill to rear of cart with (2)
phillips-head screws provided (10-24 x 1/2”).
Pinch Point
FIG. 10 Lift grill over rear flange of cart (be
aware of pinch points).
STEP 3
Front End Screw Installation
1. Install remaining (3) screws (10-24X1/2”) in front of head to cart.
2. Slide drip tray/pan back into place. Move side shelf bars up and set
trays into place.
STEP 4
Bolt Installation
After head is in place, install the bolt (1/4-20 x 2”) omitted from Step
1, and tighten all bolts on bracket. Tighten until sides are flush with
the trim only.
Note:
This bolt secures side bracket to grill head assembly for added side shelf
strength. Apply Loctite 242 (blue) to the first 3-4 threads prior to instal-
lation of this bolt
FIG. 13 Secure grill to the front of the cart with Phillips-
head screws (provided).
FIG. 14 Front right side
Содержание BGB30-BQR Series
