DCI DigiTrak Falcon F2 Скачать руководство пользователя страница 7

Страница: 7 / 8

Basic Locating

Find the Front Locate Point (FLP) and the Rear Locate Point (RLP) by
centering the target ball in the box. Mark the positions.

At the FLP, hold trigger for predicted depth reading. The Reference
Indicator

icon will appear. The Locate Line (LL) may not appear if

this step is skipped.

Find the LL by centering the line in the box between the FLP and the
RLP (see Locate Mode screen on next page).

View depth by holding the trigger at the LL on the line connecting the
FLP and the RLP.

Holding the trigger longer than five seconds enables

(see

page

). MAX Mode does not have to be at LL or FLP.

Transmitter Signal Field Geometry

Level Transmitter

1. Side view

2. RLP: Rear Locate Point
3. LL: Locate Line
4. FLP: Front Locate Point

Pitched Transmitter

1. Bird's-eye view

(top down)

2. Drill Rig
3. Side view (underground)
4. RLP: Rear Locate Point
5. LL: Locate Line
6. Transmitter (Tx)
7. Bore path
8. FLP: Front Locate Point

FLP and RLP are not equidistant from the LL when the transmitter is
pitched. For more information, see the

DigiTrak DigiGuide App

Advanced Topics > Steep and Deep

- 7 -

Содержание DigiTrak Falcon F2








