DCB SRX Multidrop, Руководство пользователя

Страница: 14 / 33

14
5.3 Using the Network Management port
To activate the NMP, press the ENTER key. When you see
AT YOUR
COMMAND >>
, the NMP is active and ready for your commands.
Type H <Enter> to display the command set.
5.4 Commands
5.4.1 Help
COMMAND LOCAL REMOTE PARAGRAPH
Show: Config SC 5.4.2
ID SI 5.4.5
Map SM 5.4.7
Map (Drop#) SMD# 5.4.7
Network Config SN 5.4.9
Status SS 5.4.11
Change: Config CP RCP 5.4.3 & 4
ID ID 5.4.6
Map CM 5.4.8
Network Config CN 5.4.10
Restart Timer CT 5.4.12
Activity Counts AC 5.4.13
Drop Activity DA 5.4.14
Zero Activity Counts Z 5.4.14
Flow Control FC 5.4.15
Test Tools TT 5.4.19
Type TY RTY# 5.4.16
Repeat Last Command
*
5.4.17
Disconnect NMP BYE 5.4.18
5.4.2 Show Config
The Show Config (SC) command shows the current port configuration
settings for both the local and the remote ports. Port numbers may be
included with this command to limit the display range. If no port
numbers are included, settings for all ports are shown. Use this
command to verify proper port configuration.