background image

14

-----------------------------------------------

==  Host Authorized Names and Passphrases - ==

Drop 16:                               Passphrase 16:

Drop 17:                               Passphrase 17:

Drop 18:                               Passphrase 18:

Drop 19:                               Passphrase 19:

Drop 20:                               Passphrase 20:

-----------------------------------------------

==  Advanced Tunnel Values  ==

Host Authentication Mode: user-list    Idle Disconnect Time (seconds): 120

Send Keep-Alives Time (seconds): 40

press return for more, ESC to quit:

-----------------------------------------------

==  RADIUS Server 1 Values  ==

RADIUS Server 1 Name/Addr:             RADIUS Server 1 UDP Port: 1812

RADIUS Server 1 NAS Index: 0           RADIUS Server 1 Shared Secret:

-----------------------------------------------

==  RADIUS Server 2 Values  ==

RADIUS Server 2 Name/Addr:             RADIUS Server 2 UDP Port: 1812

RADIUS Server 2 NAS Index: 0           RADIUS Server 2 Shared Secret:

-----------------------------------------------

==  RADIUS Common Values  ==

RADIUS Server timeout (seconds): 2     RADIUS Server retries: 2

-----------------------------------------------

==  LAN Values  ==

DHCP: disable                          IP Address: 192.168.0.96

Subnet Mask: 255.255.255.0             Default Gateway:

Host Name: noname                      Domain:

Primary Name Server:                   Secondary Name Server:

press return for more, ESC to quit:

-----------------------------------------------

==  HDLC Values  ==

Sync Mode Clock Source: internal       Internal Clock Rate (bps): 56000

Encoding: nrz                          Max Transmit Unit (bytes): 1500

Display Status

=== Ethernet Status ===

HWaddr  00:06:3B:00:51:C9

addr:192.168.0.96  Bcast:192.168.0.255  Mask:255.255.255.0

UP  BROADCAST  RUNNING  MULTICAST  MTU:1500  Metric:1

RX  packets:0  errors:0  dropped:0  overruns:0  frame:0

TX  packets:0  errors:525  dropped:0  overruns:0  carrier:525

collisions:0  txqueuelen:1000

=== HDLC Status ===

UP  POINTOPOINT  NOARP  MTU:1500  Metric:1

RX  packets:0  errors:0  overruns:0  frame:0

TX  packets:0  errors:0  dropped:0  overruns:0  carrier:2

collisions:0  txqueuelen:10

=== Tunnel node Status ===

Location              Rx Count   Tx Count   Tx Drops   Connects   UserName

--------------------- ---------- ---------- ---------- ---------- --------

HDLC                           0          0          0          1 none

192.168.0.97:22                0          0          0          0 client1

(Counts are counts of packets, not bytes.)

Display tunnel log file (y,n,p):

Содержание EST-9600




























Отзывы: