Daytona C896CMLL, Руководство пользователя

Страница: 11 / 21

10
3.5.2
Debugging
Step 1: Pour some hydraulic oil into the Hydraulic Pump Box( The Hydraulic Oil should be
80% of the box). Turn on the Switch U, connect the power supply and watch the
turning position of the Pump. It will be OK if it is clockwise. If it is anticlockwise,
change the wires in the power supply. If the Power supply is 220V, just operate
directly. After 10-15 minutes the machine can be operated.
Step 2: Step the Motor Pedal (V) to try clockwise or anticlockwise.
Step 3: Check whether the Inflation gun whether supply air normally. Check whether the
Helper Arm (F) work normally as 7-A and 7-B. The pressure in the Oil Drier should be 6-8
（
bar).
Step 4: Understand the hydraulic equipment movement to make the Hook forward and
backward as Picture7-E 7-F, Hook Wheel(Z) as Picture7-C 7-D and Hook Disk(K) as Picture
7-G 7-H.
3.5.3
Hook head adjustment
◇
The position and angle of Hook Head has been adjusted standard by the manufacturer in
factory. The users should not change it. Upper of the Hook Head there is Hand
Wheel(which can be pulled upside). For the first time to use this machine, the users can
try changing the straight side and hook side with this Hand Wheel(as shown in
Picture 8).
◇
Try locking tires in Center Spindle and unlocking tires from Center Spindle. Turn plum
blossom top clockwise and move the lock part into the square slot, as shown in Picture
8-A and Picture 8-B, tires can be fixed in Center Spindle. Turn plum blossom top counter-
clockwise and move the lock part out of the square slot, tires will get unlocked.Then pull
out the Lock Screw as shown in Picture 8-C.