![DAYLIFF DGW 200P Скачать руководство пользователя страница 13](http://html1.mh-extra.com/html/dayliff/dgw-200p/dgw-200p_installation-and-operating-manual_3922795013.webp)
10
2. Put the engine speed lever in the ‘RUN’ position.
3. Pull out the recoil starting handle.
Ÿ
Pull out the handle to the point where it feels resistant and then return it to the initial
position.
Ÿ
Push down the decompression lever (it will return automatically when the recoil starter
is pulled).
Engine
Speed
Lever
Decompression
Lever
Ÿ
Pull out the recoil starting handle again briskly with both hands
Ÿ
Do not allow the handle grip to snap back against the engine. Ensure to return it gently
to prevent damage to the starter when starting or after start
CAUTION
Never pull out the start handle when diesel engine is running,
otherwise it will damage the engine.
Engine-Control Lever
Starter/Run
Stop
Ÿ
In cold weather, when diesel engine is difficult to start, remove the plug from the rocker
arm cover and add 2cc of engine oil.
Ÿ
Replace the plug before starting. Keep the plug in the cover except when adding oil,
otherwise rain, dirt and other contaminants may enter the engine and cause
accelerated wear of internal parts which can cause serious problems.
Содержание DGW 200P
