11 / 20
ENGINE OIL
Recommended Oil
Use 4-stroke engine oil that meets or exceeds the requirements for API service classification SH,
SJ or equivalent. Always check the API service label on the oil container to be sure it includes the
letters SH, SJ, or equivalent.
SAE 10W-30 is recommended for general use. Other viscosities shown in the chart may be used
when the average temperature in your area is within the indicated range.
Oil Level Check
1. Check the oil with the engine stopped and level.
7. Oil filler cap/dipstick
Max: upper limit
Min: lower limit
2. Remove the oil filler cap/dipstick and wipe dipstick clean in a clean absorbent cloth.
3. Insert the oil filler cap/dipstick into the oil filler neck as shown, but do not screw it in, then remove
it to check the oil level.
4. If the oil level is near or below the lower limit mark on the dipstick, remove the oil filler
cap/dipstick, and fill with the recommended oil to the upper limit mark (bottom edge of .the oil fill
hole). Do not overfill.
5. Reinstall the oil filler cap/dipstick.
NOTICE
This engine is delivered without oil! Be sure to put oil in the engine before starting. Use a clean,
detergent and high quality oil corresponding to the above mentioned specification.
