3
The bell
is displayed when the alarm is set. It blinks when the snooze
function is activated.
The battery symbol appears and slowly flashes when the batteries are
getting low. When the symbol flashes faster, batteries need to be changed.
During setting operation:
If you come across a setting mode you do not wish, just hold T1 until the time
is displayed, then start again.
If you pause for more than 15 seconds, the clock will automatically return to
the normal mode and display the time.
2.
S
ETTING
T
IME
F
ORMAT AND
T
IME
1.
Press T1 for 1 to 2 seconds
2.
Press T2 while holding down T1 and keep both buttons pressed until
H:12
or
H:24
is displayed.
-
H:12
indicates a 12-hour display (with am / pm)
-
H:24
indicates a 24-hour display
3. Select the desired time format by clicking on T2.
4. A click on T1 will validate your choice and the minutes will start flashing.
5. Proceed with
setting the time
:
- Set the minutes by pressing T2.
- Click on T1 to confirm and the hours will start flashing.
