DAXOM UKDAX-10EBT, Руководство пользователя

Страница: 22 / 60

22

5.2.1.2. Filling Of Heating System

Filling process is done with blue colour filling tap under the device. This process
must be done by implementing following instructions.

Be sure that inlet tap of boiler is open.

Open the filling tap.

When water pressure indicator reaches between 1-1,5 bar, close the filling tap.


Discharge the accumulated air inside radiators by opening air relief cock placed
in side of radiators and close when water starts to flow.



When the accumalted air inside radiators discharge it can be decrease at heating
system water pressure. Make sure that heating system water pressure is
between 1 and 1,5 bar. If decreases, complete by opening filling valve










After heating system is filled, must be studiously controlled if there is water
leakage or not.
If filling valve is forgot as open and heating system pressure exceeds 3 bar,
drainage starts from safety valve inside device.