(3)
II. Operation:
A. Unpacking.
Start with unpacking the instrument and check that the following items are in the cardboard
box:
1. S
TAR
LOOK
-
D
instrument.
2. Nylon carrying case with shoulder strap.
3. Powersupply 220v/13,5v DC.
5. Carcharger 12v.
6. Adapter BNC-male/F-female.
The instruments keypad, knob and control-button is shown on picture A below. These items
controls the S
TAR
LOOK
-
D.
The power-plug is used when charging or running the instrument with the S
TAR
LOOK
-
D
powersupply.
Mainswitch, power On/Off.
RF-input via the F-connector.
The instrument also has a RS232 connector for connection with a computer.
B. Connection:
Use the mainswitch to turn the instrument On and connect an signal-source via the F-
connector.
After a few seconds warm-up the S
TAR
LOOK
-
D starts showing the frequency spectrum
of 920-2200 MHz on the picture-screen and the main-menu on the LCD-display.
III. Knob and control-button:
Start by pushing the control-button. The text on the LCD-display (upper row) change from
FREQ (frequency) to SPAN (frequency-span). Another push and the display is back in the
FREQ-mode.
DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • [email protected]
