Turn off the function by pressing the button again (no hold).
(11)
Atten
Attenuator 15 dB on/off. Indication on/off in the monitors
upper right hand corner.
DiSEqC
Chose between the different DiSEqC commands by using the buttons
on the side of the instrument.
Submenu 7 (SWx) shows the extended DiSEqC-commands
(DiSEqC 1.1).
Submenu 8 (Motor) shows the command-list for DiSEqC actuator-
control (DiSEqC 1.2).
Even 13/18V and 22 kHz can be adjusted under the DiSEqC-menu.
Memory
A multi channel measuring can be stored. Chose button nr 6 (Memory).
Select the memory-position where to store the data with the main-knob
(pos: 00-99) and push button nr 2 (save). The data is stored.
Load measured data by first choosing the memory position with the
knob (pos: 00-99).
Push button nr 1 (load) and the memory is displayed on the monitor.
Delete measured data by first selecting the memory position to be
deleted (pos:00-99) Push button nr 3 (delete) and the data is deleted.
Digital – Analog
Use this button to step between analogue and digital multi-
channel measuring.
Again, 10 pages of both ana/digi-signals with up to 10
frequencies per page can be stored.
0. 13/18V
Adjusting of 13V alt. 18V. Selected position is displayed up to the left in the LCD-display.
#. 22 kHz
Adjusting of 22 kHz on/off. Selected position is displayed up to the left in the LCD-display.
DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • [email protected]
